Capabiltiy chart of Fire fighting Hose Pipes which can be manufactured by us

Capabiltiy chart of Fire fighting Hose Pipes which can be manufactured by us.

Internal Diameter+2-0mm	Droop Pressure Kg/cm2		Burst Pressuer Kg/cm2		Double Jacketed Hose
Internal Diameter+2-0mm	Normal Hose	High Burst Pressure Hose	Normal Hose	High Burst presure Hose	Proof Test Kg/cm2	Burst Test Kg/cm2
38	25	35	40	50	40	70
45	25	35	40	50	40	70
50	25	35	40	50	40	70
63	25	35	40	50	40	70
70	25	35	40	50	40	65
75	20	30	35	40	NA	N.A.
100	10	N.A.	15	N.A.	NA	N.A.

Note : N.A. : Not Applicalble

Brief Details : For Above mention chart the Jacket ( Reinforcment )may be cotton, spun poyster, filament polyster Nylon Filament yarn depending on the end use of hose

The lining of the Hoses may be NR Latex baud, Reinforced Rubber lined EPDM, Rubber lined, N/PVC blended depending on the end use of Hose.

Hoses may be coated or without coated If coated, the coating materials are NR Latex syntetic latex or polyuraethene coating, Depending on end use of Hoses

The Colour of the Hose is N/PVC blend comppounded EPDM & N/PVC lined base Hose can resist some of the Acid, Alkali & Solvents

BACK